This article will include links to relevant documentation/articles to get started with a new DNNCam or DNNNode. Note: The information in this guide is intended for production devices and not developer devices. Network Setup Boulder AI devices ...
The DNNCam and DNNNode communicate using NTCIP protocol directly to a traffic controller. The controller can then take the API data and run it through their algorithms. The physical output of our devices is a Class D or better Ethernet cable (Cat ...
We suggest the following configurations to increase performance in low-light scenarios: Decrease zoom Increase/open the iris (100% is fully open) Use a low gain setting, like 1-10 Use a high exposure setting (i.e. 1/960 min, 1/15 max) Turn off ...
By default, the network configuration will be: Hostname: 'baidnn-<serialNum> ' For devices with BAI OS v1.4 and earlier, the hostname will just be 'baidnn' IPv4 DHCP: Enabled Link Local Addressing: Yes When searching for the device using a network ...
Unfortunately, if a device is flashed with any L4T Jetpack package (Ubuntu) then it will not be visible by the Boulder AI Platform. Please contact support to determine the best solution to update your device firmware.